3 axis CNC
Numerical control machine to grind and polish the edge on shaped glasses with internal and external curves, straight line edges and mitred corners as well as inside shapes.
It is possible to work any geometrical profile by means of linear and circular interpolation on X,Y,Z axis.
In addition to grinding and polishing of edges, CONCEPT Series machine can also perform holes, pin and screw inserts and internal or external milling and routing.
- CAD/CAM automatic design station.
- Teleassistance by Internet.
- Table with special stops to center the glass and special suckers to fix it.
- 8 (for Concept 26) or 20 (for Concept 32) position tool station with automatic selection for tool with drawal and deposit.
More than one glass sheet can be positioned on the working table.
On the spindle can be stacked up to three wheels (two diamond and one polishing) in order to grind and polish the edge of thin glass without any tool-holder change.
This machine can work in two different ways: by using the whole working table for a big glass or by sharing the table in two different areas for grinding small glasses.
In this last case the operator can easily load or unload the glass on one of the two working areas while the machine is grinding the other glass, IN COMPLETELY SAFE CONDITIONS.
||CONCEPT 32 |
||2600x1200 mm max
||3200x1600 mm max|
||2 - 50 mm
||2 - 50 mm |
of the wheel
|150 mm max
||150 mm max|
|Number of tools
|Programmable spindle rounds
||0 - 12000 rpm
||0 - 12000 rpm|
|Compressed air pressure
Watch our video!